Measurement-computing CB-COM-7012 Manual do Utilizador descarregar pdf (Página 55)

CB-7012, CB-7014, CB-7017 User’s Manual

2.32 $AA6(SL)(SH)

Description: Set Source Low/High Values for Linear Mapping.

Note: This command is for CB-7014D only.

The data are stored in EEPROM.

Syntax: $AA6(SL)(SH)[CHK](cr)

$ Delimiter character

AA Address of module to set (00 to FF)

6 Command for setting source values

SL Source low level value

SH Source high level value

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax or communication error may get no response.

! Delimiter for valid command

? Delimiter for invalid command

AA Address of responding module (00 to FF)

Example:

Command: $016−10.000+10.000 Receive: !01

Set Address 01 source value −10 to +10; return successful.

Related Command:

Sec. 2.30, $AA3; Sec. 2.31, $AA5; Sec. 2.33, $AA7(TL)(TH)

Sem comentários

Measurement-computing CB-COM-7012 Manual do Utilizador Página 55