Measurement-computing WiFi-500 Sensor Series Manual do Utilizador descarregar pdf (Página 37)

WiFi-500 Sensor Series User's Guide Updating firmware

Updating firmware

Complete the following steps to update the firmware on a WiFi-500 Sensor Series device:

1. Delete the WiFi-500 Sensor Series device from the WiFi Sensor Software and then exit the software (refer

Deleting a device on page 18).

2. Connect the device to the host computer.

3. Select

WiFi Sensor Firmware Updater from the Start->All Programs->Measurement Computing menu.

4. Click

OK on the WARNING dialog box.

5. Click the link shown in the

Update WiFi device Firmware dialog box to download the firmware update file

to the host computer.

Figure 37: Update WiFi Sensor Firmware dialog box

6. Click Browse to select the firmware update file from the host computer.

7. Click

Upload to update the firmware on the connected WiFi-500 Sensor Series device.

8. Click

OK on the Firmware Updated dialog box.

If the device firmware fails to update correctly, disconnect it from the computer and hold the device button for

20 seconds to delete all data and return the device to its factory settings.

Then, repeat the firmware update procedure from step 2 above.

To benefit from the latest improvements, MCC recommends using the latest firmware releases for your devices.

After a firmware update your device is in a factory-reset condition, and needs to be connected to the Cloud

using the WiFi-500 Sensor Series. Any existing data for this device on the Cloud is archived for safekeeping.

1 2 ... 32 33 34 35 36 37 38 39 40

Sem comentários

Measurement-computing WiFi-500 Sensor Series Manual do Utilizador Página 37