Measurement-computing UL for NI LabVIEW Manual do Utilizador Página 80
- Página / 109
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Universal Library Virtual Instruments (VIs) Digital I/O VIs
DOutScBg.VI
Performs multiple writes to the digital output port of a high speed digital port on a board with a pacer clock
like the CIO-PDMA16. When this VI is used, control will return immediately to the next point in your
program and the transfer to the digital output port from
DataBuffer will continue in the background. Use
GetStatus.VI to check on the status of the background operation. Use StopBg.VI to terminate the background
process before it has completed. Always use the StopBg.VI after all background operations to clear variables
and flags.
Summary:
Inputs: BoardNum [U32] - The board number assigned when installed with InstaCal. Can
be 0 to 100.
PortNum [I32] - Specifies the digital I/O port to set.
Rate [U32] - Number of times per second (Hz) to write.
DataBuffer [I16] - Digital output values.
Continuous [TF] - Run the VI in an endless loop (True).
ExtClock [TF] - External (True) or internal clock (False).
WordXfer [TF] - Word (True) or byte transfer (False).
Outputs:
Rate [I32] - Actual scan rate.
Context - [cluster] - Output data structure.
ErrCode [I32] - Error code. See ErrMsg.VI.
Arguments:
BoardNum The board number associated with a board when it was installed with InstaCal.
PortNum If the port type is not AUXPORT, the specified port must be configured for output.
For many boards, AUXPORT is not configurable. However, some later boards do
require that the AUXPORT be configured using DCfgPort.VI or DCfgBit.VI.
Please see board details for more information.
Rate Number of times per second (Hz) to write to the port. The actual update rate in
some cases will vary a small amount from the requested rate. The actual rate will
be returned to the
Rate argument.
DataBuffer Array of digital values to output.
Continuous This option puts the VI in an endless loop. After it transfers the required number of
bytes it resets to the start of
DataBuffer and begins again. The only way to stop this
operation is with StopBg.VI.
ExtClock If this option is used, then transfers will be controlled by the signal on the trigger
input line rather than by the internal pacer clock. Each transfer will be triggered on
the appropriate edge of the trigger input signal (see board-specific info). When this
option is used, the
Rate argument is ignored. The transfer rate is dependent on the
trigger signal.
WordXfer Normally, this VI sets a single (byte) port (default is False). If WORDXFER is
specified (True), it will set two adjacent ports on each write and store the value of
both ports together as the low and high byte of a single array element in
DataBuffer[].
80
- Universal Library 2
- NI LabVIEW™ 2
- Table of Contents 4
- Installing the software 7
- Analog I/O VIs 8
- Counter VIs 10
- Digital I/O VIs 11
- Streamer file VIs 11
- Memory board VIs 12
- Miscellaneous VIs 12
- Analog Input VIs 17
- into a readable string 18
- AInScBg.VI 19
- AInScFg.VI 21
- APretrBg.VI 23
- APretrFg.VI 25
- ATrigger.VI 27
- ALoadQue.VI 28
- OptAIn.VI 29
- output of this VI must 31
- SetTrig.VI 32
- (unsigned) 33
- TInScan.VI 36
- A/D Range – IMPORTANT 37
- Analog Output VIs 38
- AOutScFg.VI 39
- AOutScBg.VI 41
- Signal conditioning VIs 43
- ACnvPrDt.VI 44
- ACal.VI 45
- FromEng.VI 46
- ToEng.VI 47
- ScaleArr.VI 48
- ScalePnt.VI 49
- C8254Cfg.VI 51
- C7266Config.VI 52
- C8536Cfg.VI 54
- C8536Init.VI 55
- C9513Config.VI 56
- C9513Init.VI 59
- CFreqIn.VI 61
- SigSource 62
- CIn32.VI 64
- CLoad.VI 65
- CLoad32.VI 66
- CStatus.VI 67
- CStore.VI 68
- DBitOut.VI 71
- DCfgBit.VI 72
- DCfgPort.VI 73
- DInScBg.VI 76
- DInScFg.VI 78
- DOut.VI 79
- DOutScBg.VI 80
- DOutScFg.VI 82
- Streamer File VIs 83
- FileInfo.VI 85
- FilePret.VI 86
- FileRead.VI 88
- MemRead.VI 90
- MemReset.VI 91
- MemSetDT.VI 92
- MemWrite.VI 93
- Serial VIs 94
- ErrMsg.VI 96
- GetBoard.VI 97
- GetCfg.VI 98
- GetStatus.VI 101
- SelChan.VI 103
- SetCfg.VI 104
- StopBg.VI 106
- InByte.VI / InWord.VI 107
- OutByte.VI / OutWord.VI 108
Manuais e produtos relacionados com Hardware Measurement-computing UL for NI LabVIEW
(21 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.022 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais