
PCI-DAS1200 User's Guide Installing the PCI-DAS1200
13
16-channel single-ended mode pin out
A/D Internal Pacer Output
All I/O signals are brought through a 100-pin high-density connector. You can use a C100FF-x to connect field
signals to the board (Figure 2). This cable has a pair of 50-pin ribbon cables joined at one end to a 100-pin
connector. The first 50-pin cable (pins 1-50) carries the analog signals. The second 50-pin cable (pins 51-100)
carries the digital signals. The 100-pin connector mates with the PCI-DAS1200 connector. The two 50-pin
ribbon cables are terminated with standard 50-pin header connectors.
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal
Connections. This document is available on our web site at www.mccdaq.com/signals/signals.pdf).
Comentários a estes Manuais