Measurement-computing Net232 Manual do Utilizador descarregar pdf (Página 8)

8 Net232 User’s Guide,

1037-0901, rev 2.0

2) Private Local Area Network (LAN) Setup

Private LAN Setup

In this simple LAN scenario, Net232 is connected to a network with several PC’s using the TCP/IP

protocol. These networks typically use a system administrator or network analyst to address TCP/IP issues.

For private LAN setups, requirements are:

1) A unique IP address must be assigned to the Net232 device

2) The first three numbers of the IP address must be the same for all devices on the network

3) The sub-net mask should be set to 255.255.255.0

4) The gateway address can be omitted

Example

TPC/IP address set to 192.88.247.1 for Net232 device

First three numbers of all network devices are 192.88.247

Sub-net mask

is set to 255.255.255.0

3) Private LAN Setup with Multiple Networks

Private LAN with Multiple Networks

In multiple-network scenarios, two or more networks connect to a common gateway via ethernet hubs. In

regard to multiple networks, a qualified network administrator should assign all TCP/IP parameters.

*Acquisition Device refers to ChartScan, TempScan, or MultiScan. Two of these devices (in any

combination) can be connected to the Net232 via PORT 1 and PORT 2.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Measurement-computing Net232 Manual do Utilizador Página 8