Measurement-computing Micro 488/EX rev.2.1 Manual do Utilizador descarregar pdf (Página 98)

Section 5 Command Descriptions

5.28

DOMACRO

This command is used to execute the contents of a Macro buffer. A '

MACRO

error will occur if the specified Macro buffer is empty. If the optional macro buffer

number is omitted, Macro 0 is assumed.

By specifying an optional

count

, the same Macro will execute

count

number

of times, up to

255

. If the optional

interval

is specified, the macro will execute

count number of times with

interval

seconds (up to

65535

seconds) between the

start of each invocation. If macro execution is longer than the

interval

time, the

macro will execute immediately. Only one interval timer is available. If it is already

committed to one macro and another DOMACRO command is issued with an

interval

specified, a 'TIMER IN USE' error will occur. The interval time is

determined by the internal clock.

Macros can execute other Macros but can not execute already executing Macros.

If a Macro tries to invoke itself or an already executing Macro, a '

MACRO

RECURSION

error will be generated.

Refer to the Macro command for a description of the Macro features.

SYNTAX

DOMACRO

[;

] [

number

[

count

[

interval

]

] ]

[;

] [

number

[

count

[

interval

]

] ]

number

is a Macro buffer number, from

. If omitted, buffer

#0 is assumed.

count

is the number of times to execute the Macro from

255

interval

is the time interval, 1 to 65535, in seconds between the

start of successive

count

macro invocations.

RESPONSE Dependent on the contents of the Macro buffer.

MODE any

BUS STATES Defined within the specified Macro buffer commands

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 217 218

Comentários a estes Manuais

Sem comentários

Measurement-computing Micro 488/EX rev.2.1 Manual do Utilizador Página 98

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Measurement-computing Micro 488/EX rev.2.1