Measurement-computing DASYLab Getting Started Manual do Utilizador descarregar pdf (Página 4)

Introducing the MCC driver for DASYLab

Thank you for purchasing DASYLab from Measurement Computing

Corporation (MCC).

This Getting Started booklet contains the latest information on

downloading, installing, and using DASYLab version 13.0 or later and the

MCC driver for DASYLab. DASYLab is an icon-based data acquisition,

graphics, control, and analysis software package.

You must first install InstaCal – the installation, calibration, and test

utility for MCC hardware – before you can use DASYLAB with an MCC

device.

Please read this document completely before you install any software.

System requirements

DASYLab 13.0 and later requires the following minimum hardware and

operating system requirements.

Hardware



CPU - x86 compatible processor, 500 MHz or more

 RAM - At least 1 GB; 2 GB recommended

 Hard disk space - 250 MB free storage space, of which at least 200 MB

is on the system partition

 Graphics board - 24- or 32-bit (True Color)

 Screen resolution - At least 1024 × 768

Software

 Latest version of the MCC InstaCal driver and utility software

(recommended) – refer to

www.mccdaq.com/software.aspx to

download the latest version of InstaCal.

 Microsoft® .Net Framework 2.0 SP2 or later

1 2 3 4 5 6 7 8 9 ... 15 16

Sem comentários

Measurement-computing DASYLab Getting Started Manual do Utilizador Página 4