Measurement-computing CIO-DO48H Manual do Utilizador

CIO-DO48H, CIO-DO96H andCIO-DO192HUSER’S 'UIDERevision 4April, 2001

4.4 CONNECTOR DIAGRAM AND REGISTERASSIGNMENTS The CIO-DOxxH user connector is one to four 50-pin header-type connectorsaccessible from the rear of the

5 DATA REGISTERSEach CIO-DOxxH is composed of parallel output chips. Each address contains onelatch and one buffer controlling eight output pins. T

B0B1B2B3B4B5B6B7PORT C DATABASE ADDRESS + 2 (See Table 5-1 for remaining addresses.)C0C1C2C3C4C5C6C7012345678

6 SPECIFICATIONSPower consumption+5V quiescentCIO-DO48H 0.75A typ, 1.0A maxCIO-DO96H 1.3A typ, 1.7A maxCIO-DO192H 2A typ, 2.6A maxDigital Input / Outp

7 TTL TO SOLID STATE RELAYSHigh AC and high DC voltage devices cannot be controlled directly by the outputsof a CIO-DOxxH. Solid State Relays are use

EC Declaration of ConformityWe, Measurement Computing Corp., declare under sole responsibility that theproduct:Digital output boardCIO-DO192HDigital o

Measurement Computing Corporation 10 Commerce Way Suite 1008 Norton, Massachusetts 02766 (508) 946-5100 Fax: (508) 946-9500 E-mail: [email protected]

© Copyright 2001, Measurement Computing CorporationHM CIO-DOxxH.lwpYour new Measurement Computing product comes with a fantastic extra — Management co

Table of Contents107 TTL TO SOLID STATE RELAYS...96 SPECIFICATIONS ...75 DATA REGISTERS ...

This page is blank.

1 INTRODUCTIONThe CIO-DO48H, 96H and 192H are designed to have the best quality and lowestcost of any digital output board. Throughout this manual the

3 HARDWARE SETUPOpen your PC (after turning off the power) and install the board. Leave the switchesas they were set at the factory or refer to the i

Figure 3-1. Base Address Switches - All Versions3

Table 3-1. PC I/O Address SummarySERIAL PORT3F8-3FFEGA2B0-2BFFLOPPY DISK3F0-3F7PARALLEL PRINTER270-27FSERIAL PORT3E8-3EFALT BUS MOUSE23C-23FCGA3D0-3DF

4 HARDWARE INSTALLATION4.1 INSTALL BOARD1. Turn the power off.2. Remove the cover of your computer. Be careful not to dislodge any of the cablesinstal