Measurement-computing Digital488 Manual do Utilizador descarregar pdf (Página 40)

Section 3 Command Descriptions

3.10

Execute X

Commands sent to the

Digital488

will result in no action until the unit is

instructed to execute these commands. This is done by sending an

, usually as the last

character of a command string. Commands sent without an

are stored in the internal

buffer until an

is received. Any number of

Execute

commands may be inserted into

the same command string. Certain commands, such as

Bit Set

require an

after each

command in a string if more than one of that command is within the same string.

Example:

CLEAR 718

reset the

Digital488

OUTPUT 718;"F2"

send "F2" to the

Digital488

command

input buffer

OUTPUT 718;"X"

instruct the

Digital488

to execute its

command input buffer

OUTPUT 718;"A1XA2X"

two Bit Set (A) commands are within the

same string, requiring an X after each

command.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 82 83

Sem comentários

Measurement-computing Digital488 Manual do Utilizador Página 40