Measurement-computing miniLAB-1008 Manual do Utilizador descarregar pdf (Página 11)

Chapter 2

Installing the miniLAB 1008

What comes with your miniLAB 1008 shipment?

As you unpack your miniLAB 1008 device, verify that the following components are included:

Hardware

! miniLAB 1008 device

! USB cable

Additional documentation

In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at

www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf

). This booklet supplies a brief description of

the software you received with your miniLAB 1008 and information regarding installation of that software.

Please read this booklet completely before installing any software or hardware.

Unpacking the miniLAB 1008

As with any electronic device, you should take care while handling to avoid damage from static

electricity. Before removing the miniLAB 1008 from its packaging, ground yourself using a wrist strap or by

simply touching the computer chassis or other grounded object to eliminate any stored static charge.

If your miniLAB 1008 is damaged, notify Measurement Computing Corporation immediately by phone, fax, or

e-mail. For international customers, contact your local distributor where you purchased the miniLAB 1008.

! Phone: 508-946-5100 and follow the instructions for reaching Tech Support.

! Fax: 508-946-9500 to the attention of Tech Support

2-1

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Sem comentários

Measurement-computing miniLAB-1008 Manual do Utilizador Página 11