Measurement-computing E-1608 Manual do Utilizador descarregar pdf (Página 26)

E-1608 User's Guide Specifications

Network factory default settings

Table 18. Factory default specifications

Parameter

Specification

Factory default IP address

192.168.0.101

Factory default subnet mask

255.255.255.0

Factory default Gateway

192.168.0.1

Factory default DHCP setting

DHCP + link-local enabled

Network security

Table 19. Factory default specifications

Parameter

Specification

Security implementation

TCP sockets are not opened unless application sends the correct PIN code (stored in

non-volatile memory, may be changed by user, default value 0000)

Number of concurrent sessions

Vulnerabilities

TCP Sequence Number Approximation Vulnerability

LED displays and the factory reset button

Table 20. LED and button configurations

Parameter

Specification

Power LED (top)

3.3 V < V

ext

< 5.9 V: On

ext

< 3.3 V

ext

> 5.9 V: Off (power fault)

Activity LED (bottom)

On when there is a valid host connection and blinks when a command is received or

an AInScan is running.

Ethernet connector LEDS

 Left (green): Link/activity indicator; on when there is a valid Ethernet link and

blinks when network activity is detected.

 Right (yellow): Speed indicator; on for 100 Mbps, off for 10 Mbps or no link.

Factory reset button

Used to reset the network configuration settings to the factory default values.

 Press the button when applying power to the device and continue to hold for

4 seconds; the device LEDs stay off, and then both the Power and Activity LEDs

blink once indicating that the settings have been restored to the defaults.

 Release the button so the device continues startup with the default settings. If the

button is released before the two LEDs blink, the settings are not affected and the

device starts up normally.

Environmental

Table 21. Environmental specifications

Parameter

Specification

Operating temperature range

0 °C to 55 °C max

Storage temperature range

–40 °C to 85 °C max

Humidity

0% to 90% non-condensing max

Mechanical

Table 22. Mechanical specifications

Parameter

Specification

Dimensions (L × W × H)

117.9 × 82.8 × 29.0 mm (4.64 × 3.26 × 1.14 in.)

1 2 ... 21 22 23 24 25 26 27 28 29

Comentários a estes Manuais

Sem comentários

Measurement-computing E-1608 Manual do Utilizador Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Measurement-computing E-1608