Measurement-computing DBK60 Manual do Utilizador descarregar pdf

DBK60 3-Slot Expansion Chassis with Termination Panels

Overview …… 1

Hardware Setup …… 2

1 – Turn off system power and disconnect DBK60 …… 3

2 – Remove the top cover (optional) …… 3

3 – Remove the card drawer …… 3

4 – Remove termination panels …… 3

5 – Determine power requirements …… 3

6 – Configure the chassis for power source …… 4

7 – Install a power card, if needed …… 5

8 – Configure the DBK cards …… 5

9 – Install the DBK cards …… 5

10 – Connect the internal signals …… 5

11 – Install the termination panels …… 5

12 – Install the card drawer …… 6

13 – Connect external signals …… 6

14 – Install the top cover …… 6

15 – Connect the DBK60 to the rest of your acquisition system …… 6

16 – Turn on system power and check operation …… 6

DBK60 – Specifications …… 6

Reference Notes:

o Chapter 2 includes pinouts for P1, P2, P3, and P4. Refer to pinouts applicable to your

system, as needed.

o In regard to calculating system power requirements, refer to DBK Basics located near

the front of this manual.

Overview

The DBK60 expansion chassis holds up to three analog DBK cards, or up to three digital DBK cards, and

provides termination panels with connectors for various sensors. Several DBK60 units can be linked

together and then to the primary acquisition device, e.g., a DaqBook, DaqBoard, or LogBook.

Splice plate kits can be used to stack multiple DBK60 units to the primary device.

DBK Option Cards and Modules 989594 DBK60, pg. 1

1 2 3 4 5 6

Resumo do Conteúdo

Página 1 - Overview

DBK60 3-Slot Expansion Chassis with Termination Panels Overview …… 1 Hardware Setup …… 2 1 – Turn off system power and disconnect DBK60 …… 3 2

Página 2 - Hardware Setup

The front panel has a male DB37 connector that leads to the acquisition processor via a CA-37-x, CA-37-xT, or equivalent cable. The rear panel is ma

Página 3 - 3 – Remove the card drawer

1 – Turn off system power and disconnect the DBK60 If the DBK60 is presently connected in a system, turn off all system devices and disconnect the DBK

Página 4

6 – Configure the chassis for the power source Use one power source, and only one power source, for cards on the P1 bus! +5 V is selected with the DB

Página 5 - 9 – Install the DBK cards

7 – Install a power card, if needed If you determined [in step 5] that additional power is needed, add a DBK32A or DBK33 power card to the acquisition

Página 6 - DBK60 - Specifications

DBK60, pg. 6 989594 DBK Option Cards and Modules 12 – Install the card drawer A. Hold the card drawer by its handle and tilt it up slightly. Plac

Comentários a estes Manuais

Sem comentários

Measurement-computing DBK60 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Measurement-computing DBK60. Measurement Computing DBK60 User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Measurement-computing DBK60