Measurement-computing CIO-DAC02 Manual do Utilizador descarregar pdf (Página 12)

CIO-DAC02 User's Guide Installing the CIO-DAC02

Connecting the board for I/O operations

Connectors, cables – main I/O connector

The table below lists the board connector, applicable cables, and compatible accessory products.

Board connector, cables, and accessory equipment

Connector type

25-pin D type connector

Compatible cables

 C25FM-x

 DMCON-25 (D-connector, D-shell, and termination pins to construct your own

cable)

Compatible accessory products with

the C25FM-x cable

CIO-MINI25

Information on signal connections

General information regarding signal connection and configuration is available in the Guide to Signal

Connections (available at www.mccdaq.com/signals/signals.pdf).

Pinout – main I/O connector

The CIO-DAC02 I/O connector is a standard 25-pin male D connector that is accessible through the expansion

backplate.

Figure 5. I/O connector pin-out

Field wiring, signal termination, and conditioning

You can use the following cabling, screw termination, and signal conditioning products with the CIO-DAC02.

 CIO-MINI25 – 25-pin screw terminal board.

 DMCON-25 – Connector kit that includes a 25-pin male D-connector, D-shell, 25 crimp pins, and cable

termination kit to construct your own cable.

Details on these products are available on our web site at

www.mccdaq.com/products/screw_terminal_bnc.aspx.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Sem comentários

Measurement-computing CIO-DAC02 Manual do Utilizador Página 12