Measurement-computing CB-7000 Utilities Manual do Utilizador descarregar pdf (Página 10)

Search for the connected module again. It will find two modules at address 0x01 and 0x02 as

shown in Figure 1-8.

Figure 1-8. Found Two Modules at 0x01 and 0x02.

To connect more modules in the same RS-485 network, you must change the address to prevent

conflict. For example, the user can change the address 0x01 of second module to address 0x03.

Now the module configuration would be as follows:

Module 1: Address:0x02 Baudrate: 9600 Checksum: disabled.

Module 2: Address:0x03 Baudrate: 9600 Checksum: disabled.

Next, connect the third module as shown in Figure 1-9. The configuration of the third module has

the factory setting as follows:

Module 3: Address:0x01 Baudrate: 9600 Checksum: disabled

The user can connect several modules one by one. The important thing is that the modules cannot

have the same address and baud rate concurrently in the same RS-485 network.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Sem comentários

Measurement-computing CB-7000 Utilities Manual do Utilizador Página 10